How to Set Up & Use the Hooga Red Light Therapy Mask and Neck Piece for Youthful Skin ||

suvisjournalism

Dr. Luke demonstrates how to assemble and use the Hooga Red Light Therapy Mask and Neck Piece, a revolutionary tool for anti-aging and skin health. Equipped with triple-chip LEDs delivering 630nm, 660nm, and 850nm wavelengths, this device uses red and near-infrared light, with the 850nm infrared penetrating up to 50mm to boost collagen, reduce wrinkles, improve skin elasticity, and promote a radiant glow. Learn how to set it up, operate the user-friendly black controller, and wear the mask for optimal results. Transform your skincare routine with Hooga’s advanced technology!     Follow for more skincare and wellness insights!    #RedLightTherapy #HoogaHealth #AntiAging #SkincareRoutine #InfraredTherapy #HealthySkin #CollagenProduction #SkinRejuvenation #BeautyTips #Wellness

Transcript

00:00Hi, I'm going to show you how to assemble the hygge red light therapy mask and neck piece

00:06which we just unpacked today. My two-year-old son Spencer is here to help as well. Now this

00:12is everything that came in the box apart from a little bit of wrapping. There's the face mask

00:16itself, there's the neck piece, there's eyepieces that can need to be assembled onto the face mask,

00:21there's the central control and charging port, brief instruction template, velcro straps for

00:29the face and neck piece, a USB A to C cable, doesn't come with the battery, I just put that here to

00:37show you how easy it is to charge, as well as a bag that you can put everything in at the end,

00:42although personally I think I'd prefer to put the stuff back into the box. So I might just set

00:46aside the bag for a moment, we won't be using that. Now the FUKA red light therapy mask and neck piece

00:54has advantages over a number of its competitors in the field, there are actually quite a few of

00:58these type of devices on the market. However this also, in addition to the face mask, also combines

01:04a neck piece for the decolletage, which not a lot of other competitors do. In addition it doesn't just

01:11give red light therapy, so it gives both 630 and 660 nanometers of red light therapy. It also gives

01:18infrared or technically near infrared light therapy at 850 nanometers, which not a lot of devices combine

01:24both red and near infrared light. Now benefits of the combining near infrared light as well, is that

01:32it penetrates deep into the tissues, so it penetrates up to 50 millimeters into tissues, it increases

01:37fibroblast stimulation, and so therefore also increases collagen production, elastin production,

01:43and improves skin texture and tone, and reduces the signs of aging. And this is in addition to the

01:49anti-inflammatory and pain relieving effects that red light and infrared light therapy can have. Now,

01:58firstly, there's a boat, as my son has just pointed out. Firstly, we will assemble the face mask and then

02:09we'll show the central control port. So given that this is the first use, it comes with a plastic sleeve

02:16that you just need to take off, put that aside and that will be thrown away. Now this is the charging

02:23port, so I'll just remove this rubber band, sorry charging cord I should say, I'll just remove the rubber

02:29band that came to the charging cord. Now these eyepieces do need to go on, and once they're on you

02:35don't, you only need to take them off every now and again, I guess to give them a gentle clean and a wash.

02:39So they need to go on the inside, just need to mould it, there you go, so it's like that. And then do the

02:50same this side here, just like that. And then when you're finished, if you did want to give it a rinse,

03:00it's easily removed. Now Hooker strongly recommends that when you use this, that your skin is dry and

03:08free from any makeup or moisturiser or fluids. So you shouldn't be getting too much residue on it

03:12anyway. Now the next step is to attach the Velcro straps. Here's the neck piece, so it comes in this

03:19little bag here. And there are four Velcro straps, two round ones which are for the, for the face piece.

03:30I just need to orientate them in a second, and then there's two thin long ones. One is for the neck, now

03:38the shorter of the two is meant to be for the neck, so I'll put that aside there for a second, and then

03:43this will be for the head piece. Now you just do need to orientate yourself initially with this, because

03:55one has, yeah, so make sure they stick together. Yep, so this one needs to go this side, and this one

04:02needs to go this side, and it's pretty simple. You just put it through there, Velcro, put it through there,

04:09Velcro, same on this side. Easily adjustable if you're finding that it's not quite the right fit.

04:22And then it goes over like that, and there you go. Now this extra piece here, who says you don't even

04:28necessarily need to use it, but if you're wanting a little bit more support for the head.

04:31That'll just go there. Actually, sorry, my apologies. Once again, the benefit of this is that this is

04:48very easily adjustable. You need to go there, and then this goes through here.

05:01There's the head piece. Now the neck piece.

05:07Very simple. This pretty much goes around the neck, so you just need to

05:11put this here. And then when you put this around the neck, this will just go like that. There you go.

05:25Okay, so those are the Velcro straps. Now I'll show you the central control monitor.

05:31So I'll just demonstrate here, very easily they're charged. There's two C ports.

05:34You can plug it into either of the two ports. There you go. It's charging. So very simple to charge.

05:44So that's just a USB-C port. Now turning it on, this top button here. Now it's important to realize

05:51you actually need to keep your finger on it for two to three seconds. So if you just push it

05:55briefly, it won't go on. So keep your finger on it until it powers up.

05:59Now it automatically defaults to 10 minutes. So this unit has got three settings. So if you push

06:06the button again, it goes 10 minutes. So it can either go 10 minutes, 15 minutes, or five minutes.

06:12Now a minor criticism I do have of this unit is that it does default to just 10 minutes.

06:17So it doesn't go to, so let's say you used it on a five minute setting. It will still default back to

06:21the 10 minute next time you use it. And the other thing too is that there's no delay. You just,

06:25once it powers up, it just starts counting down straight away. So while you're attaching

06:29everything, you might just want to reset it. For the demonstration here, we'll have it going

06:33in five minutes. So power button and also the timing, five minutes, 10 minutes, 15 minutes.

06:38Now this middle button here is just the brightness of the actual lights. Once again, a little minor

06:44criticism is that the default is at 25%, push it once goes to 50%, three, twice, sorry, 75%.

06:52And then a third time it'll go to a hundred percent. And who does recommend that you use it a hundred

06:56percent settings. So we'll default at 25%, 50, 75, 100%. Now this bottom button is very important.

07:05So if, Hugo does recommend that you use the light at a steady frequency. So its default is just at a

07:10steady frequency. However, if you do want the light to pulse, you've got three different settings.

07:15So push it once and it'll go to 73 hertz, twice, 146 hertz, three times, 292 hertz. This is if you're

07:23wanting pulsing light and a fourth time, it'll just go back to steady light.

07:27Now, the other very important thing here is the default setting is red light, but if,

07:31say 630 and 660 nanometers. But if you want to use infrared or slash near infrared light at 850

07:38nanometers, you need to keep your thumb or your finger on it for a couple of seconds and it'll go

07:44to combine both red and near infrared light. This unit will not let you use near, near infrared light

07:49or infrared light on its own. It has to combine it either with red light or red light on its own.

07:56And then to power it off, just finger on it for a couple of seconds. So once again, just briefly,

08:02turning it on a couple of seconds. The default setting will be 10 minutes, steady light, red

08:12and 25% brightness. So power it up to 100% brightness. And then if you want to combine

08:17the infrared light, just push that. So pretty simple to use. So I'll just turn it off again when we

08:26attach it to the pieces. So attaching them to the pieces is quite easy. I often come with

08:36with connection ports, USB-C connection ports, and you can connect it to either side. So it doesn't

08:40matter which side is the face, which side is the neck. Do have it turned off when you're plugging them in.

08:45Plug them in. Plug them in. Turn it on.

08:53And there you go. The lights are working. So I shall demonstrate to you putting it on.

09:11There you go. Snug as a rug. They do recommend that you have it on fairly snug,

09:20but not too tight. And then the neck piece here.

09:26So this is meant to go onto bare skin, but I'll just demonstrate over my shirt.

09:32And I am now ready for a 10 minute session. Oh, now one important thing that I did neglect to mention

09:56earlier, is that Hooger does recommend that if you're using red light on its own, which is what

10:00I'm using at the moment, that it'd be a 10 minute session. But if you're using both red and infrared

10:06light, that it should be a five minute session. So I'm all ready to look younger in a few minutes time.

Category

Transcript

Recommended