Ninja Blast Portable Blender Troubleshooting by No Filler Fixes - Dailymotion

No Filler Fixes

Stop the guess-work and get your Ninja Blast™ portable blender whirling again! In this step-by-step troubleshooting playlist we tackle the most-searched problems owners face: 🔴 Solid or blinking red-light errors – what each code means and the exact reset sequence. 🔋 Won’t charge / battery drains fast – USB-C charging tips and how to spot a faulty cell. ⚙️ Blades not spinning or jammed – safe unclogging, motor-base alignment & gasket checks. 💧 Leaking cups & sticky buttons – seal-ring inspection and leak-proof reassembly. 🧽 Deep-clean routine – mold-free maintenance that keeps warranty intact. Each video follows the official BC100/BC150 error-code guide and real-world fixes crowdsourced from Ninja® support and user forums. Grab your model (BC100, BC150, BC151, etc.), press play, and in minutes you’ll be blending smoothies—not frustration. Search keywords: Ninja Blast portable blender troubleshooting, Ninja Blast error codes, red light fix, Ninja BC100 not working, Ninja BC150 battery issues, Ninja Blast solid red, how to reset Ninja portable blender, Ninja Blast common problems and fixes.

Transcript

00:00Can't start a blend? Check this safety lock first.

00:04If your Ninja Blast won't start and there's no error light, it might be the safety lock.

00:09Here's what to check.

00:101. Align the cup properly.

00:13The Ninja Blast won't run unless the blending cup is perfectly locked in.

00:17Line up the arrow on the cup with the one on the base, then twist clockwise until it clicks.

00:22If it's off by just a few millimeters, the motor won't activate.

00:262. Check for obstructions around the locking threads.

00:29Smoothie residue, fruit pulp, or even dried water can block the locking connection.

00:34Clean both the inside threads of the cup and the base with a narrow brush.

00:38We've linked one below that fits the grooves perfectly.

00:413. Don't push the power button too soon.

00:44If you press the button before the safety lock is fully engaged, the motor won't spin.

00:49Always wait until the cup is secure before pressing the button.

00:524. Still not working?

00:55Try a reset.

00:55Remove the cup, then press and hold the power button for 10 seconds.

01:00Reattach the cup.

01:02Wait for the light to stop flashing.

01:04And try again.

01:04If your safety lock is clean and lined up, the blender should work normally.

01:09If it still won't start, contact Ninja Support using the link in the description.

01:14And to avoid this problem in the future, grab the narrow brush set we've linked below.

01:19If this helped get you blending again, subscribe to No Filler Fixes for more quick appliance breakdowns.

01:24Thanks for watching and blend easy.

Why Won't My Ninja Blast Start? Try This Easy Fix!

Category

Transcript

Ninja Blast Portable Blender Troubleshooting

Recommended