Ninja Slushi Not Dispensing After Cycle? Try This Fix

No Filler Fixes

📦 Recommended soft cleaning brush set (paid link): https://amzn.to/4jDVRhu  As an Amazon Associate, I earn from qualifying purchases — it helps support the channel at no extra cost to you.   Ninja Slushi (FS300/FS301) finished the cycle but won’t dispense slush?  This guide shows what causes frozen blockages, stuck taps, and texture issues — and how to fix each one safely.   📌 Applies to: Ninja Slushi FS300 / FS301  📌 Ninja Support: https://support.ninjakitchen.com/hc/en-us   #ninja #ninjaslushi #shlushi #stuckcontainer #howto #fixit #kitchenfix #ninjaappliances #appliancerepair #troubleshooting

Transcript

00:00Ninja slushy not dispensing? Here's the fix.

00:04If your ninja slushy finishes the cycle but nothing comes out when you pull the tab,

00:08it's usually a blockage or assembly issue.

00:11Here's what to check when slush won't flow.

00:13Step 1. Let the mix soften for one to two minutes.

00:17Right after a cycle, the slush might be too frozen to dispense immediately.

00:21Let it sit for a minute or two. This helps it loosen just enough to flow without clogging.

00:26Step 2. Check the tap for a frozen blockage.

00:29Sometimes small chunks of fruit or ice refreeze near the nozzle and block the tap.

00:34Remove the container and inspect the spout area.

00:37If needed, rinse it under warm water or use a food-safe brush to clear it.

00:42Step 3. Make sure the tab is opening all the way.

00:45If the handle feels stiff or clicks too early, the mechanism might not be fully engaging.

00:50Press down slowly and firmly. If needed, disassemble and clean the tap mechanism.

00:56Step 4. Stir the mix slightly inside the container.

01:00Sometimes the outer edges freeze harder than the middle.

01:03Give the slush a gentle stir with a spoon or silicone spatula to loosen the texture near the tap.

01:08If it still won't dispense, you might be dealing with a damaged nozzle or internal clog.

01:13Check the link in the description for support or part replacement info.

01:18If this helped get your slush flowing, subscribe to No Filler Fixes for more quick fixes that actually work.

01:23And if your tap area clogs often, we've linked a soft cleaning brush set below that keeps it clear between uses.

01:30Thanks for watching and swirl smooth.

01:32Thanks for watching and swirl smooth.

Category

Transcript

Recommended