🛠️ Fix Your Ninja Cold Press Juicer Fast (JC151 / JC151UK) If your juicer's acting up—stuck parts, weak juice flow, or poor locking—this video walks you through the top 5 real-world issues and how to solve them.
📦 Recommended Tools (Affiliate Links): ✅ Prep Brush (for fruit buildup) → https://amzn.to/44R88ea ✅ Groove Brush (for tight spots) → https://amzn.to/3Z0CM0Z Disclosure: As an Amazon Associate, I earn from qualifying purchases. Using these links supports the channel at no extra cost to you.
🔧 Covers: – Pulp sticking under the auger – Juicer not locking properly – Poor juice output – Hard-to-clean gaps – Misreading lid sensor
00:00Top 5 Ninja Cold Press Juicer Problems, and How to Solve Them
00:04If your ninja cold press juicer is giving you trouble, don't worry, these are the 5 most common problems people run into, and here's how to fix each one fast.
00:13The 1. Juicer Won't Start
00:14This usually comes down to misassembly. Make sure the juicing chamber is locked onto the base before adding any other parts.
00:22The lid and pulp container also need to click in fully. Even a small misalignment will keep it from turning on.
00:27The 2. Produce Isn't Juicing Well
00:30If you're getting poor juice output or chunky results, the problem might be how you're prepping your ingredients.
00:36Make sure to cut produce into small chunks and avoid overripe or mushy fruits. They clog the filter fast.
00:43A produce prep brush makes rinsing and cleaning firm fruits easier before juicing. I've linked the one I use below.
00:49It's soft, food-safe, and great for things like apples and carrots.
00:53The 3. Juicer Stops Mid-Use
00:55This usually means the motor is overheating or the auger's jammed. Let it cool down for 15 minutes, then check for blockages in the chamber.
01:04Use the reverse function if you hear straining. It can clear clogs without disassembling.
01:094. Leaking
01:10From the spout or base, leaking is usually caused by pulp buildup blocking seals or parts not being fully aligned.
01:16Remove the chamber.
01:17Check for dried pulp and clean around the seal areas.
01:20A narrow, soft brush makes this easier, especially under the spout flap and groove notches.
01:26I've linked the same one I use in the description. It clears stuck pulp without scratching.
01:305. Parts Won't Click Together
01:31If the litter chamber won't twist into place, check the assembly order and clean the locking grooves.
01:37Always start with the chamber on the base, then add parts in order.
01:41Never force anything.
01:42If it doesn't lock, something's out of line.
01:46These are the most common issues.
01:48And once you know how to handle them, the Ninja Cold Press is super easy to keep running.
01:52If you need a soft brush for cleaning the mesh or clearing grooves, I've linked the exact set I use below.
01:58It makes all five of these fixes faster.
02:01And if something's still not working right, Ninja Support is linked in the description too.
