Ninja Blast Not Charging? Try This

No Filler Fixes

📦 Recommended fast USB-C charger (paid link): https://amzn.to/446HiP4  As an Amazon Associate, I earn from qualifying purchases — it helps support the channel at no extra cost to you.  Is your Ninja Blast Portable Blender (BC151UKBK / BC151BK) refusing to charge? This guide shows you how to troubleshoot common charging issues — from bad cables and dirty ports to weak power adapters.  📌 Applies to: Ninja Blast Cordless Portable Blender (BC151UKBK / BC151BK) 📌 Ninja Support: https://support.ninjakitchen.com/hc/en-us  #ninja #ninjablast #portableblender #ninjablender #howto #fixit #troubleshooting #blenderrepair #appliancerepair #diyrepair #kitchengadgets #kitchenfix #chargingissues

Transcript

00:00Why your Ninja Blast won't charge properly If your Ninja Blast isn't charging like it should,

00:05here are the most common fixes to try. 1. Use the right charging cable

00:10Not all USB-C cables deliver the same power. Some cheaper or older ones may charge too slowly,

00:16or not at all. For best results, use a high-quality USB-C cable that supports fast charging.

00:22We've linked one below that's reliable and works well with portable appliances like this.

00:262. Check the charging light. When plugged in, the light should flash green,

00:31this means it's charging. If you don't see any light, try a different USB port or wall adapter.

00:373. Make sure the port is clean. Inspect the USB-C port on the blender. If there's lint,

00:43moisture, or debris inside, charging may fail. Use a soft brush or dry air to gently clean it out.

00:504. Let the battery warm up. If the blender was stored somewhere cold,

00:54the battery may not accept a charge right away. Let it reach room temperature before trying again.

00:595. Try a different adapter. Some wall plugs don't deliver enough power.

01:04Try a different USB wall charger, ideally one rated for fast charging.

01:08Still no luck? Contact Ninja Support using the link below.

01:12And if your cable or adapter is the problem, we've got a recommended replacement linked in the description.

01:17If this helped, subscribe to No Filler Fixes for more quick appliance breakdowns.

01:21Thanks for watching and BlendEasy!

Category

Transcript

Recommended