John Deere EZCal demo: precision calibration on C Series air carts

John Deere product and system specialist Alexander Conterno on JD’s EZCal system on their C Series air carts.

Transcript

00:00With our EZCOW system, basically to calibrate each of our meter rollers for our tank, first of all we

00:07select on what tank we want to calibrate. In here we can actually select multiple tanks.

00:13If there is a mismatch in our roller you can actually see the warning label there. So we'll

00:21just calibrate the one tank for the time bringing. From there we see that we've got set up our green

00:27roller. So what we want to do is go over to our EZCOW system and actually verify that we've

00:32got the green meter roller positioned there. And then we can hit start calibration.

00:39So from here the system is going to meter out some products. So basically just purging the roller.

00:46And then from there it's actually going to start to meter product to a set number of revolutions.

00:52So whilst it's doing that on our display here we can see the system is counting up the number of revolutions.

00:59It's also weighing the product as we go. Once it's hit its target number of revolutions, which is 15 for

01:06the green roller, it's then going to weigh that hopper and verify the weight that it's calculated.

01:16So we can actually see that new meters of space of value comes up and then from there we can hit accept.

01:24And that automatically saves that value and sends it directly to our tractor cab display there.