Skip to main contentSkip to footer
  • 04/06/2025
📩 Recommended Siemens EQ6 Water Filter Cartridge (paid link): https://amzn.to/4jIlfmm
Regular filter changes remove limescale and impurities, stopping “Replace Filter” alerts and keeping your coffee tasting fresh.

As an Amazon Associate, I earn from qualifying purchases — it helps support the channel at no extra cost to you.

Is your Siemens EQ6 leaking water onto your counter or under the machine?

This fast guide walks through the most common causes of leaks — from full trays and seals to loose parts inside. Fix it step by step without tools or stress.

In this video, you’ll learn:
Why the EQ6 leaks even without a warning
How to clean drain paths and tray slots
What to check on the water tank and seals
How to test for internal issues
📌 Contact Siemens support here:
https://www.siemens-home.bsh-group.com/uk/customer-service/contact

#siemens #siemenseq6 #eq6plus #espressomachine #coffeefix #descaling #howto #fixit #troubleshooting #appliancerepair #kitchenfix #diyrepair #coffeetech
Transcript
00:00Is your Siemens EQ6 leaking water onto the counter, under the machine, or from the tray?
00:06Don't panic.
00:07This is often caused by a full tray, blocked drain path, or a loose part.
00:11Let's fix it, step by step.
00:14By the end of this video, your machine should stay clean and dry.
00:17Step 1.
00:18Empty the drip tray fully The EQ6 doesn't always warn you right away.
00:23Pull out the drip tray and grounds bin.
00:26Make sure you pour out all the water, not just from the top.
00:29Some leaks are just silent overflows.
00:33Step 2.
00:34Clean the drainage channels With the tray out, wipe down the inner chamber.
00:38Use a damp cloth to clean the drain slots and check for blockages.
00:42Built-up grounds or residue can cause leaks around the tray area.
00:45Step 3.
00:46Check the water tank seal.
00:48Remove the tank and inspect the rubber seal at the base.
00:51If it's misaligned, dry, or cracked, it can leak when reinserted.
00:55Wipe it clean and press the tank in firmly until it clicks.
00:58Step 4.
00:59Reinsert the brewing unit.
01:01Open the side door and pull out the brewing unit.
01:03Rinse it, dry it, and slide it back in.
01:07If it's not locked in properly, water can leak during brewing or rinsing.
01:12Step 5.
01:13Run a rinse cycle and check again.
01:14Step 6.
01:15Go to cleaning and maintenance.
01:16Rinse appliance.
01:17Watch closely for leaks during and after the cycle.
01:21If it leaks again after these checks, it's time to contact Siemens Support.
01:25Still leaking after all that?
01:26There could be an internal seal failure or drain hose issue.
01:29We've linked Siemens Support in the description if you need service.
01:34If this video helped, subscribe to No Filler Fixes for more quick troubleshooting videos.
01:39Got another issue?
01:41Drop it in the comments.
01:42We might feature yours next.
01:47We'll see you next time.
01:48We'll see you next time.
01:49Take care.
01:49Take care.

Recommended