Saltar al reproductorSaltar al contenido principalSaltar al pie de página
  • hace 5 días
#cableinfo #megacable #mega #Xview+ #megamovil

Categoría

🤖
Tecnología
Transcripción
00:00How are you my friends from Chabatec? In this video we are going to talk a little about
00:06the public IP and with some things that some adjustments that I have made to my
00:13friend router nt zt f660 and I have been able to obtain this because more than one address
00:23public IP and I want to emphasize that I have a public IP address outside of
00:31Nothing, my service is Mega Cable. I have to pay for that public IP at this time.
00:39At times, for the dynamic public IP you pay 100 pesos, for the static one, 500 pesos.
00:46But if you are from Telmeds and you have, I think, 100 megabytes or more or something like that.
00:51They say they give you a public IP for free and you don't have to pay.
00:58and with this you don't need to do it in bridge mode, it stops on the same router you can
01:04Get this a double IP or triple IP depending on how you want to configure it.
01:12Let's warm up so you can see more or less what we're about.
01:18Speaking right now I'm going to go to that is the main page of my o nt zt and I'm going
01:26where it says internet at the top
01:31and I'm going to go here to the part where it says one and towards here or here
01:38Guan and those are the connections that connect me, that is, it could be the internet
01:45in different services
01:47and my internet connection that comes configured by default is this one here
01:54the one that says hs and it is a configuration that comes by default and that's how it is, I don't have it
02:01It was modified because I'm going to leave without the internet signal now and it's a virtual network
02:08a plan of the velan and then from this same thing here I have an IP address and for example this
02:20Let's say it's one east x direction, let's say it's one hundred and seventy-seven, so to speak.
02:29point fifty-eight point two twenty-five
02:37point five let's suppose that here for this I receive this this is public IP address that outside of
02:49lan of for delano out of of of this of nat this then I can forward ports
02:59and I don't have any problem and when I do it if you look here it says routine, that is, it is this one, it is working for me
03:10distributing an IP address of this one, well, I imagine that this one hundred and seventy-seven comes
03:18jokes that come from point one this depends on point one of the end point one is it can be is the
03:27main router that is assigning me this IP address but how do I do it so that I get it
03:34give another part for example a place point five maybe point 35 true or keep this one that I have and
03:45apart from that it throws me another one and according to the configurations here in this one it can give me that I can complete maybe four
03:56different let's say imagine if we had the option of having four the five at the 35 the 100 so to speak and the point 210
04:08Suppose we had the option to have these four IP addresses as I have configured them, if they have been given to me, then this is what I mean.
04:21Many gamers ask me how they can change the external IP address because the best
04:28You play with these and they manipulate you and well, you wouldn't like it if you could change it, you already use this one and if they manipulate you, then you do this to us.
04:37You use this one and they drive you, so you use this one and you take it easy and you wait for them to take your van away in one of the
04:44I can use these now, okay, so let's go. Now that I've more or less explained what I'm talking about, let's warm up now.
04:55This and as I told you this is my internet connection that gives me internet in this one because my company manages my ONT and does its
05:06Modifications, right? They have protocols there and they manage it.
05:14This is the telephony, it is a configuration to give me a telephone line, this one and this one I created myself.
05:25and I can't create more because I imagine that if this space was configured like that, it would be 1 2 3 4 5
05:35only 6 configurations if I add another number 7 no no no it will not save it for me it will not mark an error I had to
05:43delete the one that said this ip tv to be able to add this one that says routine 2 and keep in mind that this routine is what
05:54same as this one and this one is a copy of this one or these two are a copy of this one but let's open it
06:02Now you look here at the internet
06:06Internet
06:09and he says routine, he doesn't say this bridge is routine
06:16So it means that it will give me another IP depending on what IP address it is, it will give me a different one.
06:24Well, the configuration down here is the same as this one here.
06:33You set these same parameters here
06:37These are the same ones from here, look
06:41they notice is the important thing
06:43The name is whatever you want to give it, internet routine.
06:47internet routine
06:49and the internet routine below is 1500 version 4 of hcp
06:56so this one here is equal to 1500
07:03ip ip 4 of hcp and the same then it is like a copy right it is as if we duplicated it but
07:12The detail here is that it will give you a direction and it is peripheral, at least that is what it gives me.
07:17Well, by experiencing the truth I am not discovering anything new, I am simply showing you what has happened to me.
07:24doing these experiments
07:26and
07:27So here is my routine, so I have one and I have routine 2 and if you notice it is the same as this one, right here because that is the name, right?
07:37It differs but you see the routine here
07:40routine here internet here internet here internet here 1500 here 1500 here well it's practically the same this is the same
07:51where it does differ is in this one in bridge mode in the bridge
07:57at bridge
07:59Hey
08:00here it is and you can see them
08:02because
08:03because
08:04Because here it doesn't say routine, here it says bridge connection
08:08TRUE
08:09and down here it doesn't bother me anymore, it doesn't bother me that
08:14ip
08:16v4
08:17like here
08:18like this truth
08:19then it doesn't make me feel that way anymore
08:21this one like this one here in this case look for example how minus one no longer puts me on the nat either
08:32Because it is one, this is the bridge mode and all of this will take an effect, this will control it, my secondary rotator, the one I have added
08:45so this is what i have created now
08:52They will say then, but where will he give me the IP or how will I know when he will give me one or when he will give me another?
09:00let's go here
09:03Let me close this here
09:05Now if I'm here, for example, this gives me the first public IP address, this is the one I'm not moving, this is the one that my internet provider assigns me directly. Let's go, it's an example, it's not what I have, but for example, here I have 172, right, as I had put, point 78.
09:30point 125
09:32point 5 so to speak
09:37Yeah
09:38Yeah
09:42So
09:44point 5
09:45This one here can give me a point 10 so to speak.
09:49this one here point 25
09:52point 25
09:54point 25
09:56point 25
09:58point 25
10:00and this one down here is throwing me another point 10
10:05Oh well, point 12 so that it can't be fixed
10:09So right now here in this unit I am receiving
10:14one two three four IP addresses
10:19at the same time
10:21I already uploaded a video showing it there
10:23Hey
10:24as you can also get more IP addresses if you connect it to a switch first
10:31Hey
10:32before it reaches you in
10:33Hey
10:34before it reaches you, eh
10:35you put it in bridge mode before it reaches your eh or second router that you add
10:41Hey
10:42you put a switch on it
10:43a switch like well I put it in the image a switch this one
10:48Hey
10:49There I have the video, there I put the link so you can see it
10:52but if you don't want to connect another switch
10:55and you are not interested in putting it in bridge mode
10:58You just want it from there
11:01get more IP addresses
11:03you can try this
11:05For example
11:06in Telmeds
11:08Hey
11:09There I mentioned Telmeds in that video
11:11But I'm honest, I didn't try it because I had access to that router.
11:17But it wasn't mine, that is, that service wasn't mine, I couldn't use it or modify it.
11:23But seeing the settings, it seemed to me that it could be done.
11:26but there was a detail
11:28They said that to be able to do it in bridge mode you needed the east
11:35the credentials of pp or p and something like that
11:40Well, to be able to connect, unlike
11:44service that uses mega cable you do not use you do not need the credentials
11:47and when you do bridge mode, the telephony should stop working
11:52because unlike this mega cable one
11:57to this one at the Telmeds service
12:01and mega cable here you have this connection separately
12:06if I explain myself
12:08This is the telephone, this is the internet
12:11This is the control they have
12:13and there was the other one that was and ptv
12:16The truth is that I deleted it, I have it saved there, the settings can I do it?
12:22come back whenever I want but I deleted it so I could have the option
12:26add another one this
12:28So this one and the one from Telmeds since it doesn't have PTV
12:33It brings the telephone and the internet and it brings it eh within the same connection of the same link
12:39So that's why when you do bridge mode you no longer pass the configuration of the telephone ve
12:46Well, if you're not very interested, then they might not give you the credentials.
12:51Yes, yes, no, this is a business account, something like that, they say, I'm not sure.
12:59But in case you have that Nokia that I saw, that Nokia has the option of, let's suppose
13:11This address, for example, said LAN 1 there.
13:18that's what 2 lan 2 said more or less that's what lan 2 said lan 3 said
13:293 and lan 4
13:33It also said ss id 1 and so on, I think up to 5 or 6, I don't know how many, those are from the wifi network
13:48and on one side there was an option where you could adjust it and for example lan 1 gave you the option of
13:57It routinely gave you the bridge option, so if you use bridge it is to put it in bridge mode, but since you don't have those
14:09You won't be able to use those credentials, but you can use the routine function here, put it in routine.
14:19routine
14:22and you can try on lan 1 and connect a computer or something with a lan cable if you don't have something with a lan connection
14:33Well then use SS ID 1, you have to make sure what it is if it is your first activated Wi-Fi.
14:44or which one there if you have to check which ones they are, it can't tell you that this is one and this is another, but with LAN you can't lose.
14:53because if it is LAN 1
14:55It's LAN 1, so on the back of your One you connect to one and do an internet test and go to a page.
15:06that it detects what public IP you have and then you disconnect it and connect it in the 2
15:12and it has to give you a different feeling if this works it has to give you a different feeling because the 1st one will give you a different feeling than the 2nd one
15:233 and 4, that is, 2, 3, and 4 should theoretically be the same, but 1 must be different because you are putting routine here.
15:31true then from your internet connection, it will assign you another one that you are using the routing function, this will give you another one
15:42Now that I did it here, now let's go.
15:48Let's go back to the One, here they are, look, for example, in this one, if you have the ZT and you have Megacable and you have a public IP address
15:58already contracted or another company maybe in your country you can try it if for example as they say clearly in South America those who have this, well other companies that there are
16:12Now I'm missing the name Movistar, maybe it's also possible, then you put add here and it will show you this, for example, connection name
16:24You put the one that is in this case 3 to differentiate this one anyway it will not let me save it and this is where I tell you look here it just gives me the routine option I leave it in routine
16:38routine and what is the service that I am going to route in this case in mine it is internet but in Telmeds I think it is this tr or 69 something like that then this
16:53this
16:55Internet friends, I'll leave it like this.
16:57mtv here I won't change it because
17:01look
17:03it says here
17:05This is what I was telling you
17:07what type of connections
17:13For example
17:15For example, you can guess that it is routing
17:17as is the second
17:19by putting IP
17:21They will no longer ask for credentials
17:23you can do that
17:25That experiment from Telmeds
17:27those who use it do not need
17:29credentials the
17:31of this of the
17:33p p p o e
17:35those who do not need
17:37can be used here
17:39that says ip
17:41takes away your credentials
17:43And if you want to try the Telmeds experiment, go ahead.
17:47here it is
17:49because in this
17:51if you ask for them
17:53user name
17:54password
17:55authentication truth
17:57nothing
17:58because it is not a virtual network
18:00It's not a bitlan
18:02here it is turned off
18:04but for example
18:05we as it is ip
18:07and a virtual network
18:09if it's going to be
18:11because the virtual network
18:12we are going to put exactly
18:13the one here
18:14the one that is working for us
18:15in this case
18:16547
18:170
18:18plus 1
18:19then here it would be
18:21557
18:23here it is
18:25with NAT enabled
18:27and as it is
18:29here it would give me another IP address
18:31but he won't let me save it
18:32because there are already 7
18:33here look at it
18:34here it is look
18:36the number of entries
18:38says he has reached
18:39the maximum limit
18:41says please delete
18:43any of the entries
18:44that I have here
18:45already registered
18:46and
18:47and
18:48and put them back in
18:49here
18:50again
18:51then I had to delete it
18:52from IP TV
18:53so that he could give me this
18:55that is, the option to add another
18:57then this
18:59Well, you can do it, friends.
19:01Now we are going to go to the section
19:03what is called
19:04by Biden
19:06Hey
19:07This is where we are going to select
19:09Hey
19:11which networks, whether Wi-Fi or LAN ports
19:14They are the ones who will manage those connections
19:17so let's go in here
19:20Hey
19:21and as I tell you, we have these same connections
19:23who are here
19:24This is the first one that brings
19:26is the internet provider
19:28These three that I have created
19:30routine1
19:31routine2
19:32and bridge
19:33so
19:34Hey
19:35what interests us is
19:36Hey
19:37redirect
19:38to the ports
19:39or connections
19:40or networks
19:41to those we have created
19:42For example
19:43Hey
19:44I'm going to show you how I have it there in the routine1
19:46in the routine1
19:48that IP address that is going to be received here
19:51nothing else
19:52it suits him
19:53this goes
19:55is going to come out
19:57through LAN3 port
19:59he
20:04ssid3
20:05I mean
20:06the wifi network
20:07Hey
20:08which is classified
20:10like number 3
20:11you should already
20:12to know what name this network has
20:14does not have this same name
20:16on your cell phone
20:17They won't detect it like that
20:19this
20:20and apart in the 4
20:23I mean
20:24Hey
20:26the IP address
20:27that I
20:28get
20:29through this connection
20:30the
20:32she's going to throw it at me
20:33in these three
20:34this
20:35ports
20:36or exits
20:37what do you want to call it?
20:38LAN1
20:39ssid3
20:40and ssid4
20:42in it
20:47in the routine2
20:48if you look closely
20:53I have it different
20:55I have it on LAN2
20:57ssid2
20:59ssid6
21:00Here you see that it is different
21:01Hey
21:04What happens if they record each other?
21:07Well, maybe there could be an IP conflict.
21:09if you are not going to give them internet service
21:11Hey
21:12So be careful
21:14can take a test
21:15Hey
21:16For example, LAN ports have, if not more, three connections.
21:19he
21:20and they don't have
21:21a bridge connection because they can leave 1 and 2 for 1
21:252 for 3 for number 3 and so on, but it is necessary to make your notes
21:32Hey
21:33Now we go to
21:35at bridge
21:37to the one of
21:39as I do have it in bridge mode
21:42Hey
21:43Well, I do it
21:44I use only one in this one
21:47LAN4
21:48my router
21:50my second router is connected to LAN4
21:52and then it moves me to another direction
21:54IP
21:55in fact this IP address
22:00what's wrong with me
22:01it is the same
22:03that here in the of
22:06in the first
22:07herein
22:08in the original
22:09herein
22:10This one and the one below are the same IP address
22:13but the other one sends it to me in bridge mode
22:15this one handles it
22:17the second router
22:20the second router
22:22Hey
22:23then this
22:24this
22:26you already have them, eh?
22:29Hey
22:30well activated or redirected the ports
22:32but
22:33I'm talking about physical ports or connections
22:36I'm not talking about ports other than port 80 or games like that, these ports are not
22:41So whether this is for Biden or where we are going to assign them once we have done this, for example in this one, well I don't have any like that, and I haven't moved this one, but this one, if they press apply
22:56Right? They finish and press apply their changes, press apply their changes and there it is.
23:04Hey
23:05So this is just so you can see and know, for example, what SSID 3 refers to and so on.
23:13For example, I go to my local network and I go to network connections 1 and I go to the configuration, this second one where it says SID configuration and you see here you are, look at SSID 1
23:35SSID 1
23:37SSID 1
23:38SSID 1
23:42and I have this name so it will appear on our devices when we search for them
23:48SSID 2
23:50this is going to appear
23:52eh with a different name that I have it like that
23:56Right? This is where I tell you this rule.
23:59It gives me an IP address
24:01This rules me, it gives me another IP address
24:03because I have them separately
24:06So that they are very careful about that
24:09and
24:10and a recommendation when you finish all your settings
24:14don't forget
24:15go to
24:17this
24:18to save your settings
24:21It is here in the management of the system
24:24In my case it says here
24:26user configuration management
24:28So here it says back up configuration, that is, back it up
24:31I put it on back
24:33I put it on back
24:34and he's going to open it here where it is
24:36I save my
24:37in this part of
24:39on my computer
24:41and I already give you for example an
24:43a name
24:44I have many
24:46this
24:47many save look for example this is one
24:50I already have it
24:51but I have them with names
24:52and you notice
24:54I have given them different names
24:55bridge
24:56original
24:57I put the date on it
24:58bridge
24:59routing
25:00telnet
25:01because it is also activated
25:02bridge routing
25:032
25:05and then here the bridge
25:07on all wifi
25:09there are the connections
25:11bridge
25:12rich
25:13I changed the username
25:14and here look at bridge
25:16without IPTV
25:19and IPTV off
25:21So once this is done, save it here.
25:25Look here, I'm going to save it
25:26this
25:27already
25:28It is already saved
25:30This is it for the video
25:31I hope it is very helpful to you
25:33subscribe
25:35Please share it
25:36You help me a lot if you like it and share it.
25:38and if you are new then this one
25:40and subscribe
25:42Activate the bell too so that you receive the
25:46the news for when I upload videos
25:48I upload videos this
25:50I try to upload at least one a week
25:54even if it's a short or something like that
25:56Also if you can support me on my other channels
26:00fiber info and cable info
26:02and cable info
26:03I also play there
26:05some
26:06about what is cable internet info
26:08more of the mega cable service but
26:10I'll also answer related questions here.
26:13and see you in the next video
26:15See you soon my friends

Recomendada