How to Install 4 Lug Wheel Spacers on Your Honda Fit? - BONOSS Honda Accessories - video Dailymotion

BONOSS Wheel Spacers Grace

How to Install 4 lug wheel spacers? Do you want to give your Honda Fit a more aggressive and personalized look? One of the easiest and most cost-effective ways to do so is to install 4 lug wheel spacers to achieve a wider stance. In this video, we'll provide a detailed, step-by-step guide on how to install 4 lug wheel spacers and achieve a wider, more aggressive stance. Click now to watch and learn more!  #hondafit #bonoss #wheelspacers #bloxsport  🔜Click Here to get the BONOSS Honda Fit Wheel Spacers: https://www.bonoss.com/product/bonoss-forged-active-cooling-al6061-t6-wheel-spacers-hubcentric-pcd4x100-cb56-1-for-honda-fit  🔜Click Here to get the BONOSS Honda Parts: https://www.bonoss.com/vehicles/honda/  How to Install 4 Lug Wheel Spacers on Your Honda Fit? - BONOSS Honda Accessories  📄Here are the data: Vehicle: Honda Fit Product: BONOSS Forged Active Cooling Wheel Spacers (formerly bloxsport) Material: Aluminum Alloy 6061-T6/7075-T6 Thickness: 15mm-50mm wheel spacers  (Hi, I’m Grace. For a better user experience, this article is original content uploaded by humans. It is not generated by Artificial intelligence (AI) Models or tools.)

Transcript

00:00How to install four lug wheel spacers on your Honda Fit?

00:04A great way to improve the performance and appearance of your Honda Fit is by installing

00:10four lug wheel spacers.

00:12However, it is important to choose the right type of spacers and ensure that they are installed

00:19correctly to avoid any negative effect.

00:22Let's take a look at the correct installation steps.

00:25Use a cross wrench to loosen the lug nut on the side of the wheel in a diagonal sequence,

00:31but do not remove them completely.

00:34Using jacks to support each end of the Honda Fit is a better safety measure.

00:40Use a cross wrench to remove the wheel side lug nut.

00:44Remove the wheel of the hub and set it to the side.

00:48Look at the wheel hub assembly forward.

00:51You can use a brake cleaner to remove them.

00:53Remove any rust and dirt from the wheel hub with a rack.

00:57Wider the entire surface to ensure it is smooth.

01:01Because all of that surface may cause the wheel spacer to not fit perfectly with the hub.

01:07Install the bonus hot FT cooling four lug wheel spacers.

01:11Then install the matching lug nuts.

01:13Tighten them with a torque wrench.

01:15A key advantage of bonus four lug wheel spacers is the FT cooling feature.

01:21These four lug wheel spacers are designed with petal-shaped grooves.

01:26The grooves allow the external cold air to flow continuously inside the spacer when it rotates.

01:32The air takes away the heat.

01:34After the dissipating heat for the braking system,

01:37all bonus four lug wheel spacers are forged.

01:41In addition, high precision four lug wheel spacers provide high surface integrity,

01:47effectively guarantee safety, stability, and reliability, and ensure smooth installing experience.

01:55Install the ring and then install the stock nut.

01:59Use a torque wrench to tighten them on the wheel.

02:02Make sure they are secure.

02:04Remove the jack stands.

02:06Slowly lower the Honda feet until the tires fully touch the ground, and remove the jack.

02:13Use a torque wrench to tighten the lug nut to the specific torque.

02:16Always tighten them in a diagonal sequence.

02:20This will ensure that the lug nut work.

02:22The same operation is done for remaining wheels.

02:26Bonus recommends checking the use of four lug wheel spacers every six months,

02:31and checking the vehicle's operation to ensure safe driving.

How to Install 4 Lug Wheel Spacers on Your Honda Fit? - BONOSS Honda Accessories

Category

Transcript

Recommended