How To Make Tower Cooler Using Pvc Pipe __ कूलर कैसे बनाये

Entertainment hub

Watch How To Make Tower Cooler Using Pvc Pipe __ कूलर कैसे बनाये - Entertainment hub on Dailymotion

Transcript

00:00Guys, you know how you know how much warm the heat is and how much warm the heat is and how much warm the heat is.

00:16So, today we will be going to be PVC pipe to make a tower cooler, which means you can get a warm temperature and a few hours of light.

00:26And this cooler will be a little bit easier.

00:30So, this cooler will be going to make a cooler.

00:33So, let's see if we can see a video.

00:39Wow, I'm acting on the camera.

00:41Guys, I'm not going to be able to make a guitar.

00:45This is a 6 inch PVC pipe.

00:47And now we are going to make a tower cooler.

00:51This pipe is off-line market for 70 rupiah fit.

00:55You can get a price more or less.

00:58And this pipe is about 3 feet.

01:00And this pipe is about 1 feet.

01:03This is so much cooler.

01:06So, first of all, we will cut this tank.

01:11This pipeою has taken into case of this lock.

01:13So, it has to be failed and it sank here.

01:29color is the side of the air to the side of the car and the side of the car

01:35cooling pad for cutting.

01:37Let's start marking cutting.

01:59have a good idea of the

02:03aیرنے کلنی کے لیے کٹنگ کر دیا اور اس کے دوسری سائٹ پر

02:06ہم نے کولنگ پیٹ کے لیے کٹنگ کر دیا اور اب اس کے بعد

02:09ہم نے ہینی کام پیٹ سے چار کچھ اس ٹائپ کے لمبے لمبے ٹکڑے

02:12کیا اور ان چاروں ٹکڑوں کو اس پائپ کے اندر سائٹ سے فکس کرنا

02:16ہے تو انہیں فکس کرنے کے لیے ہمیں ایک فریم بنایاں ہوگا

02:19تاکہ ہم ان چاروں ٹکڑوں کو ایک دمچہ دیکھ سے فکس کر سکیں

02:23तो इसके लिए हमने PVC Pipe और PVC Teats के टुकडे कटकर लिए

02:27तो चलिए अब हम इन सभी टुकडे को चिपका करके frame mesma धरा करना दिया कर लिते हैं

02:32लीजिए guys cooling pet के लिए हमारा frame उतुनmorist कमा उतुनका भीयोति हमारा frame लिए vivants कמךा देना है

02:42and now we are going to fix this frame

02:48so guys we have fixed frame

03:05so that we have two small small small pieces of the bag

03:08so that cooling pad doesn't leave the bag

03:11and the side side we have a small small small hole

03:14so that cooling pad will not give us a small piece of the bag

03:19we will fix this in the bag

03:22do

03:24do

03:28do

03:32do

03:36do

03:38do

03:40do

03:42do

03:44do

03:50do

03:52do

03:54do

03:56do

03:58do

04:00do

04:04do

04:10do

04:12Also, we have to fix our honey pad.

04:15So, we have to use solter iron to do this whole thing.

04:18Now, we will take a couple of money for this piece to fix it.

04:32Now, we will take a 4 inch blow bar.

04:34This is 16 inch.

04:36This is on the offline market.

04:37This is the 5-100,500.

04:39Then we will take off a couple of two-somethings.

04:43This is the 220.000 Yves.

04:46This is the 5-100,000 Yves.

04:48First, we will tie this pipe under the top.

04:53Then we will tie this blower into the bottom.

04:55So, when we fit this motor,

04:58I will cut the a single piece from MDI board.

05:01We will tie the pipe under the bottom.

05:04So, let's go.

05:06and we will fit the motor to fit the motor to fit the motor

05:36see guys, we have used motor and blower to fit the motor and blower

05:57after the rume we used to have smugly

06:01and then we also used to be pbc pipe

06:05to fix the rume

06:09and then we used to fix the rume

06:11and then we used to fix the rume

06:15and then we used to set the rume

06:18for the rume

06:24so guys, you can see that we have all these two

06:36we have all these two

06:39and we will not have to add

06:41so guys, we will find some type of water pump

06:45this one will get you from off-line market

06:4750-60 rupees

06:48and this one will get you

06:50220 volt light

06:51we normally have to remove the function of the operator, so if we want to enter the operator's

06:59top of the operator, then we will remove the operator's water pump.

07:10Guys, we have water pump wire to cooler from the corner so that our water pump wire to blowers won't be.

07:23Now guys, for the fan speed of water pump, I have 2 stack of voltage regulator and I will fit this cooler to this side.

07:35So this is why I have a goal piece of PVC seat and cut it down to the regulator

07:41So let's do it, we will fit the regulator and connect with them

08:05so guys

08:16we have this connection

08:17to a certain way

08:18and then we have this

08:20upper side fix

08:21and then we have this

08:22screwing up

08:22and then we have this

08:24and then we will have this

08:25connection

08:26easy

08:26if you do

08:28don't understand

08:30it will also

08:32make it

08:32you can detect

08:33this

08:35and now we have a tank for this cooler

08:39so tanky for this pipe

08:43and we have a tank for this pipe

08:47so first we have a pack for this pipe

08:51so we have a PVC sheet with this size

08:55so let's go

08:57fix this pipe

08:59now guys

09:01we have a water level check for this pipe

09:05and we have a transparent seat

09:07so we have to know

09:09how much water is

09:11water level

09:13water level

09:15water level

09:17water level

09:19water level

09:21water level

09:23water level

09:27water

09:29it came out

09:31water

09:33weather

09:37unsettled

09:39nice

09:41infected

09:43and now we can check it

09:45and now this cooler

09:46lake

09:47in this tank

09:48stick

09:49platform

09:51grey

09:52pi and

09:54so now we have to fix this cooler

10:00cooler

10:04cooler

10:08cooler

10:12cooler

10:14cooler

10:16cooler

10:18cooler

10:20cooler

10:22cooler

10:23cooler

10:24cooler

10:26cooler

10:28cooler

10:32cooler

10:34cooler

10:36Id

10:38add

10:40xt

10:42hyped

10:43Igor

10:44son

10:45i

10:50i

10:52so guys finally our tower cooler is ready to get ready to go

10:56and you can see how much it looks like this

11:00so let's go now color it is so good

11:04guys we have color it is so good

11:08so guys we have color it is so good

11:12so let's go now

11:16ows okay

11:18so

11:24so

11:26we will fill

11:28and we will fill it

11:32here

11:34with

11:35we will fill it

11:38using

11:40water

11:42into

11:44can

12:05go

12:09so if you have a cooler with a cooler then you can see it

12:16just a little bit easier and you can see it

12:22and you can see it here

12:25that the cooler is very powerful

12:28and guys this tower cooler is very powerful

12:32so if you have a cooler

12:35So if you like this tower cooler, then you can subscribe to our channel and subscribe to our next videos.

12:47See you in the next video.

12:48See you in the next video.

Category

Transcript

Recommended