02:20I will cut a piece of paper which will be cut .
02:30I will cut a piece to wrap up here.
02:31I will cut the piece to wrap up here.
02:37I will cut the piece to wrap up here.
02:42here we will cut the front tozi of the width , and then the width will come from the front
02:52here then the width is as long as it is out of here, we will cut the width of the width
03:00hole here is the width of the width, here is the width of the width of the width, the height
03:11keyboard button which we can use Starting our
03:20budget of folding tape on our board
03:37and here we will cut the extra cut and add a new cut to the pattern and here we will apply the cut to the pattern and here we will apply the extra cut to the pattern and we will complete the cut to the pattern
03:57this is the way you can do it and this is the way you can do it and this is the way you can do it
04:16with this way I have a little bit here now I have a ribbon apply here that I have 4 inch
04:24which is applied to the length of the length.
04:27This is our base.
04:29This is our base.
04:31This is the second slide.
04:34After I put my ribbon on the line,
04:37I will complete my stitching.
04:40After I put my double fold on the line.
04:42Then I put my double fold on the line.
04:44Then I put my 5 inch in the line.
04:46Then I put my button on the line.
04:50I apply to the center.
04:53Then I put my double front.
05:00Then I have'm going to 33 brer.
05:03I put a sign in storage.
05:09Then I prepare my double head's button.
05:13Iyle has a strap on a line.
05:19After I set a line with this,
05:21If you want to put a crease at the end, you can put a crease or pencil on the other side.
05:28You can cut out extra extra, if you want to put a center.
05:35You can see it in the center of your kurta.
05:41If you want to put a center, you can put a button on the left.
05:49well
05:51yeah
05:53then
05:55we would like to put a
05:57measurement
05:59in order to
06:01put the
06:03cut
06:05cut
06:07cut
06:09cut
06:11cut
06:13cut
06:15cut
06:17cut
06:19तो तो तो तो तो अपने टोके के निशान पर आकर
06:48अपने जो सलाई है उसको बॉक्स बना लोंगे ठोके के निशान पर आना इसलिए ज़रूरी है क्योंकि आपने नीचे वाली जो बटन पट्टी है उसको दुबाना बहुत ज़रूरी होता है अदर्वाइस वह पट्टी बिलकुल खराब बनेंगे
07:04अब हमारी बटन पट्टी तयार हो चुकी है अब जो हम फ्रांट
