00:00Now we go with this advanced network 2.4 but this is advanced that we
00:12You have the advanced one here, this one here, we can adjust the power.
00:18It's at 100% but maybe you want 80% because you don't want it to
00:23The signal goes out to the street, maybe just at your home then
00:28You can leave the channel at 80%, I don't recommend that you leave it on automatic.
00:35I recommend you put it in any of the ones here from 1 to 11.
00:41better than having it on automatic now if you don't know which one to put it on, this one is on the
00:48description of the video I leave you the link so you can support yourself with one
00:53application called wifi analyzer there it tells you which channel is the one that you
00:57It is recommended to set the router according to the environment where you live.
01:01Now in the channel of the wave channel width for your transmission channel says
01:12Here 20 40 I recommend that you put it at 40
01:15and here you put a notice that this one that you can better if you want to put it from 20 to 40 or 20 that you don't
01:30They recommend the pure 40 as I have here, you don't pay attention to them, you leave it at 40 because I have already done it
01:36Many tests and in 40 it gives you the speed, the information traffic is more, it is broader than using only 20, then I recommend 40 here in this one here, unless you already know what classification of Wi-Fi card your equipment has, you can select this one. I recommend that you leave it in this one, this is the most common one to leave on everyone.
02:04So don't move it there, leave it here now, the bottom part like this, we'll leave it once we've adjusted here, the most important thing is this: the bandwidth.
02:18and the channel
02:20It is the most important thing and this is secondary, but for some it is important, but personally, these two have to be on a fixed channel.
02:31and here in 40 not 20 nor automatic 20 40 previously it was good to have in 20 megahertz or in 20 40 but now it is not when the speeds were less than 50 megas now it is not there and we press apply once we press apply the settings will be saved
02:53Now let's go with the advanced settings in 5G. Here you already know it is the power 80 100% channel. Do not leave it in automatic mode, always put it on a fixed channel in which you think is the most convenient.
03:15As I say, use a tool like Wi-Fi Analyzer, but you can start with the first one, 36, and leave the bandwidth on the east channel at its highest.
03:32Here it says that it is in automatic 20 to 160 here there is no option to leave it alone at 160 then let's leave it here
03:43Because it is where the greatest data transmission bandwidth will be used, we will not move it here, we will leave it as it is.
03:59Here it says they are going to be in this one, in this one, also on my channel there is a video explaining how it works, it is similar to the match
04:12then this
04:14Here you can activate or deactivate it, but I personally do not activate it.
04:23I leave this one unactivated, but you can try activating it if it works for you, leave it and you can't remove or deactivate it, and just press apply and that's it.
04:37The necessary advanced adjustments for the 5G band have already been made.
04:43What did you think of the video, my friends? Share it, give it a like and subscribe so that every day we become more in this Chavatec community and see you soon, my friends.
