05:42We will get to 8-10V in the case of the system.
05:46This is the case for the system.
05:50I need to use the system for the system.
05:54I can use the regulator for this system.
06:00Regulator 6V.
06:02I am using the system for automatic voltage.
06:067806
06:26but I'll be able to recover the current голum and move out of the current test
06:32and make sure they are דiot and we'll be able to do it for the future
06:37and look at the previous test
06:40this is the regulator, because this is S1 is the 6V
06:46with a light bulb, which is about 2-10V
06:51The regulator is about 2A
06:58It doesn't require any sink or sink
07:03It doesn't require any sink
07:06It doesn't require any sink
07:09Let's see
07:11We need the sink
07:16We need the sink
07:20Here we need the sink
07:22We need the sink
07:24We need the sink
07:26I need the sink
07:28For example
07:30I need the sink
07:32The sink
07:34Now the sink
07:37The sink
07:39The sink
07:41Vehicle
07:44This sink
07:48I don't need to use this one, but I only need to use this one.
07:54I'm going to use the same one, so I can use this one.
08:00I need to use this one.
08:06I can use this one.
08:10You can use the 6 inch.
08:13It's the same as the full size.
08:16This is not the same.
08:19I will not use the 6 inch.
08:22The next step is to start with the 60mm.
08:26The next step is to get rid of any problem.
08:29We will have a big problem.
08:32We will not have any problem.
08:35We will use the 2-3 inch.
08:38So we will reach the next step.
08:41We will continue to be the first step.
08:46This is the first step of the step.
08:50This is the first step.
08:53This is the first step.
08:57This is the first step of the step.
08:59Before I work with the step, I will adjust the step by the step.
09:03I will be able to travel with the step.
09:07I will download a USB USB
09:12I will collect the or Вам set as well as the other 5V
09:17And the silver one, and a red one
09:20Here we have a new connection to the vehicle
09:22There are also one connection between the vehicle
09:27I can easily unlock the other side
09:29And also the other side
09:32I only put it in the middle of the vehicle
09:361A
09:44This is how I did the first step with me
09:46I did the transition
09:50or the transition
09:52I will get the air to the air to the air
09:54as we can see
09:56I got all good
09:58This is the first step with me
10:00I will get the air to the air to the air
10:04Consengl pan
10:11I will send mine into my own
10:14Basin
10:16I will send it here
10:18Let me轉
10:20I will send the air
10:26We will send the air to the other side
10:28To the back
10:30I will send the air to the air
10:32Then in the process, we will add any more approach, then another one is going to add the range of the range in the function box at once.
10:37All the options are in the left, and we will add a similar way to the rather than the other one
10:44The control box is in the same time, we can store the range of the range with the range of range of range
10:48Now I took off the range of range of space, and we will continue with the range of range of range, and while we are streaming with the range of range of range, we will set several range of range from there, and then just turn on the range of range from range range
11:01.
11:08.
11:11.
11:16.
11:21.
11:23.
11:26.
11:30Now here are the liners, for example, for the brakes.
11:36The car comes in with the front of the brakes.
11:44the base number
11:48theЗ
11:58the 12-10-15-15-15-15-15-15-1-13-14
12:05and we will load the system
12:09the question here, this is how much the CR is supposed to be operated
12:13I'll show you there, or not?
12:16In my God, that is the order.
12:18See how he is good.
12:19We came in with the battery in my home.
12:222021, we'll be able to clean the battery in approximately 60 degrees.
12:25This is the same pattern after the emergency.
12:28After that, we'll start with little ferrule.
12:30Let's apply the two extra frames to change the volt to 80 degrees.
12:35As soon as I can manage the volt to 80 degrees,
12:37we will not you will generally run a little bit in one direction.
12:39Because, when we're doing loop 2,
12:41so I can release the
13:09First I'll slide the side of the bridge from the other side.
13:15You may be stuck here in the previous slide, so I put it in the left side.
13:20Then I'll slide the side of the bridge from the other side.
13:30And after I move the side of the bridge, I'll slide the side of the bridge.
13:36It's in the middle of the shape of the body, I'm getting ready to finish the shape of the body.
13:43Now I'm going to pass from the back side of the body, and I'll follow the fighting between the body and the body and the back side of the body.
13:50We can apply it to the body as I can, according to the body.
13:57I'm in the way I'm going to go to the body, before I get ready to fix it.
14:01This one of these men I'm going to focus on.
14:03We want to install the camera
14:05This is the new square
14:09We will see the car
14:16We can install the camera
14:21Now I am going to install the camera
14:247-8V
14:27This is 10V
14:33So that's how I got my second to be able to produce my first next to this video But I'm with it
14:37After that. I have done the process of finishing my work
14:40But I just need to change this process once I was about 6V
14:44And I also do the other side of the video
14:49As I have not mentioned, I will change the parts of the video
14:56This is the direction of the Diode or the Voltaic Regulator.
15:04This is the 6V and I will work with this and I will show you how to work with this.
15:11With regards to the Regulator, there is a small picture of the Regulator.
15:16This is the picture of the Regulator.
15:18Of course, this is the top of the earth.
15:22This is the top of the earth.
15:24The X axis is due to the inside.
15:29Then the X axis is 6V.
15:35We have to push the regulator into the right.
15:42The X axis is the second part.
15:46The X axis is the second part.
15:51First it'll be 6V
15:57The result is 7V
16:01It'll be 8V
16:041V
16:06This is now the result will be 5.9V
16:10To be careful, the result will be perfect
16:12Let's keep my mind
16:13This is the final one
16:16This is the final one
16:17This one is still
16:18This is the relay, I will bring him into the 5V, which is in the end of the 5V.
16:26This is the relay relay, the relay is not enough.
16:33The relay is in the same way, the relay is in the same way.
16:39I will bring the relay relay.
16:46and I will show you the two components
16:51and the one that I would have to be in 5V
16:57and I will show you the 3Ds of 5V
17:01and the other components are in 5V
17:05and I will show you the 3Ds of 5V
17:09and I will show you the 3Ds of 5V
17:15We are going to remove the car from the diode.
17:22If I use the diode with the regulator, I'll go ahead and get the regulator.
17:33I will remove the diode from the diode.
17:37If I use the diode, I'll remove the diode from the diode.
17:42Today I can get addicted to the
17:56I will fix all the details of the machine
18:01First, I will fix the bathroom
18:06I will fix the compact as well
18:11here, the fuzer, the fuse, and the fuse widely.
18:21I would not need to come to the other part of this part or to the other part of the fuzer,
18:27but I will also come to the front of the battery, or the battery,
18:31and the front of the battery and the other part of the d.
18:37We can add the side to the left side.
18:43We can add the side to the left side.
18:48The side is too much, and the side is too much.
18:52We can add this kind of vertical line.
18:55We can add the side to the left side.
18:59We will start to add 100% to the right side.
19:07This is the first stage of the detector which is the first one, the third stage of the detector.
19:21This is the first stage of the detector, the third stage.
19:34I will show you how the fullt is done with me and I will show you how to fix it.
19:45The fullt is 5-10mm, very nice, I don't have any other one with the handle.
19:50This is the time of the fullt is done with the fullt.
19:53I will show you how to fix it with the automatic button.
19:58I will show you how to fix the fullt.
20:03The camera is ready to go to the camera.
20:07The camera is ready to go to the camera.
20:11Now we're finished the process.
20:15I'm going to close the camera.
20:19The camera is ready to go to the camera.
20:23I'm not going to show you anything.
20:27I want to show you everything.
20:31With very simple cumbersome, we will have any other format.
20:34We will show you all the way up with your items, so let's see how much the
20:36way it is.
20:38Your function will be improved, and in fact, we can do not get any
20:43of all, but we will apply to our actual results.
20:45At least, we will have any improvement, so let's make sure they will be able to
20:49do exactly what you want, so we can create a look at a new set.
20:53When we are using an M2, we will focus on a 1st from the
20:55new set to the center.
20:56We will keep the andquele, we will be able to try to set it.
21:01Now I have to add something else.
21:02Now I am quite sure that I have to place the water bottle in the form of a device to keep it very well.
21:09And I'm afraid that I can restore it in the wire.
21:17and I can still use the limits and apply the support button in the form of thekem6 bar.
21:25I can also see the material in the description of the video.
21:28I can see the evolution of the video in the description.
21:31So the overall video is not a good one.
21:34I am going to add a new video to the video.
21:37I hope you can add some information on the video.
21:41I would like to add some information about the video.
21:44I hope you enjoyed the video.
21:46Thank you very much.
21:49This video is useful.
21:52I'll send you a link to the video.
21:54Thank you so much for watching and don't forget to subscribe to the channel and subscribe to the channel.
22:02Thank you so much for watching and I'll see you in the next video.
