This video shows how to add oil, fuel and coolant to a diesel generator. Keep in mind that refill coolant ONLY after the genset has fully cooled down. Ensure the engine oil is compatible with the
engine model—refer to the engine manual for specific specifications. Fill the coolant to the specified level as indicated in the manual.
For more info, visit: https://www.dbdieselgenerator.com/
engine model—refer to the engine manual for specific specifications. Fill the coolant to the specified level as indicated in the manual.
For more info, visit: https://www.dbdieselgenerator.com/
类别
🛠️
生活方式文字稿
00:00Hello, this is Dingbo Power. We'll guide you through the refilling coolant, engine, oil, and fuel.
00:07This is the fuel filler port. This is the fuel inlet pipe.
00:11Connect the pipeline securely for fuel supply. This is the fuel return pipe.
00:15After connecting the pipelines, loosen the exhaust screw and press the hand pump until all air is expelled from the pipeline.
00:23Tighten the screw firmly afterwards.
00:25Select the appropriate fuel grade based on the ambient temperature of the operating environment.
00:31Check the oil dipstick to ensure the oil level is between the low and high marks.
00:35Add oil if the level is below the minimum.
00:38This is the engine oil filler cap.
00:41Unscrew the cap before refilling.
00:43Ensure the engine oil is compatible with the engine model.
00:46Refer to the engine manual for specific specifications.
00:50Tighten the cap securely after refilling.
00:52This is the coolant filler neck.
00:55Critical note.
00:56Refill coolant only after the unit has fully cooled down.
01:00Refilling during hot operation may cause cylinder block cracking or coolant splashing each action.
01:06Fill the coolant to the specified level as indicated in the manual.