Skip to playerSkip to main contentSkip to footer
Matt K
  • 5/3/2025
Lets see what we cab d=o on the rope
Transcript
00:00It's pretty sharp actually. I should hold it this way.
00:07It might have a bit of texture on the grips now instead of just being kind of white-ish.
00:16So hopefully that's not too hideously ugly or anything like that.
00:30We'll do something bushcrafty after I slice some rope.
00:35I had to sharpen the knife twice on a guided system because the first time when I sharpened it it was catching on the paper.
00:47It was catching on the paper because the apex of the edge was chipped.
00:53It was chipped in several places. It just would not pass through the paper very smoothly.
01:02So yeah, a bit problematic when you've got a chipped apex.
01:20So I had to sharpen it a second time.
01:24Cause for that could be that when it was heat treated they may have charcoaled the apex or the thinner part of the blade a little bit perhaps.
01:38I don't know. It's bloody windy today.
01:45So I don't know.
01:50The HRC 6055 which means 60 HRC bit it.
01:56It's a nice four finger grip.
02:14My hand doesn't come anywhere near the edge anymore.
02:18It's maybe a whole 5mm clearance now.
02:24So let's see what happens on the rope.
02:27Let us see what happens on the rope.
02:30L due.
02:38Let us see what happens on the rope.
02:41On the rope when let pieces on the rope,
02:43I Arbeit actually does not break the cemetery anymore.
02:47Let us see what happens on the rope.
02:53Let's see.
02:55You done directly at the rope at the body.
02:57Let us know we got a little knot.
03:29Okay.
03:35Okay.
03:36It could be also because it's such a steep curve.
03:54I freshly sharpened the knife and I failed to slice paper with it because the curve is
04:05so steep.
04:07So, it's not exactly the easiest thing in the world to...
04:14Oh, there we go.
04:16There's a spot there where it's...
04:27Went through that time.
04:34Went through that time.
04:38Went through that time.
04:42So, I think we're on 200 slices and we are getting touchy-feely at 200 apparently.
04:55I'm not going to call that a fail but I will call it touchy-feely.
05:02Oh, it's a little bit of a rough spot there.
05:07It's just a little bit of a rough spot which is where it might...
05:12Where it's probably hitting the wood.
05:14It might be rolling the edge.
05:17Now, usually it's just a rough spot on there.
05:21It's usually the edge rolling.
05:24So, it could be doing a bit of a roly-poly on us.
05:32Where we're hitting...
05:33Where we're digging into that wood.
05:35Might be rolling the edge.
05:37Okay.
05:38...
06:02Okay, so did that burr, did it go away?
06:16No.
06:17There's definitely a bit of roughness going on there on that apex.
06:24And I would suggest that might be a roll.
06:29So, there it goes, a fail.
06:42That is not a fail.
06:49That is not a fail.
06:56Alright, so we're still being a bit touchy-feely and there's just a little bit of a rough spot.
07:09Yeah, it's just a little bit of a rough spot on that edge.
07:16Yeah.
07:21So, let's see where it actually does a nice fail for us.
07:34What?
07:59Oh, there's a bit of a, how do you do it?
08:12Going through that tile.
08:19Going through that tile.
08:27Going through that tile.
08:31There's definitely a little rough spot there.
08:47With the wind being annoying.
08:52going through that tile.
08:55Is that good?
08:57Okay.
09:32Okay, so definitely doesn't want to slice at that one point anymore.
09:55I would say that that is definitely a bona fide failure one.
10:02Just a quick and dirty wood strop.
10:30We've got a little bit of a niggle there still.
10:37I've got rid of it, mostly.
10:44Let's see what happens.
10:51Okay, that was buttery smooth.
10:58I would say we definitely rolled that edge.
11:05We definitely rolled it.
11:06So what we're going to do now is we're going to do something a little bushcrafty I suppose.
11:12We're going to do a little bushcrafty I suppose.
11:19We're going to do a little bushcrafty I suppose.
11:26We're going to do a little bushcrafty.
11:33We're going to do a little bushcrafty.
11:36I'm going to do a little bushcrafty.
11:39Okay.
11:40Let's see what happens.
11:43I'm going to do a little bushcrafty I suppose.
12:45Just cleaning it up a little bit.
12:52There's a wind.
12:54Very, very annoying wind.
12:58There's a wind.
13:06Very, very annoying wind.
13:11There's a wind.
13:33It's going to be nice and tricky.
13:41Let's see how this goes.
13:48Catching the brain a little bit there.
14:09This is right in here.
14:13I think we're going to have to do something about that.
14:16My hand's running a little bit too close to the edge when I'm scraping.
14:21Not as good on that side.
14:31It feels crispy, but it's not scraping very well.
14:38What's going on here?
14:48What's going on here?
14:49Is it because I'm right handed?
14:55Is that the problem?
15:02The wind.
15:03Let's not blow all this away.
15:09Okay, the wind.
15:10Let's not blow all this away.
15:16Okay, the wind.
15:23Let's not blow all this away.
15:24Let's not blow all this away.
15:30Okay, first effort.
15:58We'll blow all this away.