Arduino Uno Quadcopter
- 6 years ago
Arduino UNO is used as the control Board or Flight controller of this Quadcopter.\r
Buy Quadcopter Kit(Arduino, Battery not included)-\r
Code and Schematics-\r
\r
These Motors are connected to speed controllers which are being inputted with the PWM signals through Arduino.The Flight controller consists of the PID algorithm to control ESCs.The MPU6050 Module (GY-521) is used to sense the orientation of the Quadcopter.It also consists a magnetometer for proper directions.A transmitter is used to control the throttle, Pitch, Roll, and Yaw. I am trying to add some more features to it, Like a sonar sensor to sense Height.Also finding some Better Motor Replacements for my A2212s.\r
\r
Instagram-\r
\r
Parts Used:\r
A2212 brushless motors x 4-\r
\r
Speed controllers x 4-\r
\r
propellers-\r
\r
Arduino Uno R3-\r
\r
MPU6050(Gyro+Acc)-\r
\r
silicone wires-\r
\r
Angle Brackets-\r
\r
M3 Screws-\r
\r
M3 Nuts-\r
\r
Aluminum Bars or c-channels\r
and some common tools
Buy Quadcopter Kit(Arduino, Battery not included)-\r
Code and Schematics-\r
\r
These Motors are connected to speed controllers which are being inputted with the PWM signals through Arduino.The Flight controller consists of the PID algorithm to control ESCs.The MPU6050 Module (GY-521) is used to sense the orientation of the Quadcopter.It also consists a magnetometer for proper directions.A transmitter is used to control the throttle, Pitch, Roll, and Yaw. I am trying to add some more features to it, Like a sonar sensor to sense Height.Also finding some Better Motor Replacements for my A2212s.\r
\r
Instagram-\r
\r
Parts Used:\r
A2212 brushless motors x 4-\r
\r
Speed controllers x 4-\r
\r
propellers-\r
\r
Arduino Uno R3-\r
\r
MPU6050(Gyro+Acc)-\r
\r
silicone wires-\r
\r
Angle Brackets-\r
\r
M3 Screws-\r
\r
M3 Nuts-\r
\r
Aluminum Bars or c-channels\r
and some common tools