Cross Cut Sled w/ Clamp

Subscribe for weekly projects! In this video I show how to build a cross cut sled table saw. \r
\r
Buy Plans for this Build! \r
\r
Build a variable box joint jig for this sled! How To: \r
\r
I used baltic birch plywood and angle aluminium with some bolts and screws for this build.\r
\r
Cut List: 1/2 inch (12 mm) Plywood: \r
\r
A) 1 @ 18 x 14 inches (457 x 356 mm)\r
B) 2 @ 17 by 3/4 inches (432 x 19 mm)\r
C) 4 @ 18 by 3 1/4 inches (457 x 83 mm)\r
D) 4 @ 3 1/4 by 2 1/2 inches (83 x 64 mm)\r
E) 1 @ 10 15/16th by 1 3/4 inches (278 x 44 mm)\r
F) 2 @ 3 1/4 by 3 1/4 inches (83 x 83 mm)\r
G) 2 @ 2 by 2 inches (50 x 50 mm)\r
\r
1/8 inch 3/4(3 x 19 mm) Angled Aluminum:\r
\r
2 @ 18 inches (457 mm)\r
2 @ 1 3/4 inches (44 mm)\r
\r
Screws & Hardware:\r
1 1/4 inch screws (30 mm)\r
1 inch screws (25 mm)\r
3/4 inch screws (19 mm)\r
3 1/2 inch long, 5/16 bolt (90 x 8 mm)\r
5/16 inch nuts (8 mm)\r
variety of bits\r
\r
How to find Linn @ Darbin Orvar \r
\r
\r
\r
\r