Brass Hose Nozzle Review Made in U.S.A. vs China Nozzle

Brass Hose Nozzle Testimonial http://www.amazon.com/Hose-Nozzle-High-Pressure-Garden/dp/B00CVG681G/ Hello there, Joshua Jantz right here, with the World's Finest Brass Hose Nozzle. I simply wanted to take a few seconds right here to reveal to you the World's Finest Brass Hose Nozzle and compare it to what you might discover inexpensively produced, say, from China, or some various other foreign nation. One example is this Nozzle, which I in fact did obtain from a Chinese maker. There are a few things that I want you to remember about this. If I unscrew the outer covering right here of this nozzle, the first thing you notice is that it only has one o-ring right here, and also as you can see through the part right here where the water comes out ... the water comes in through the hole right here in the back, then up the shaft, and out this hole right here. Observe the size of that hole, notice the size of the threads right here where it screws together, and also notice that it's two parts: this shaft right here is one part and if you can see that lip right here around the base right here that's where this shaft and the outer shaft has been pushed fit right here into this outside part that screws onto your hose. The drawback to this design is, firstly, I've had this nozzle on my desk, messing with it for some time, and I wound up having to lubricate this nozzle because those grooves, the means they are produced, it simply became stiff. And I wound up having to lubricate the nozzle. I can rotate it with two fingers however it does not turn as nicely as I'd like. The size of the hole that's in the top restricts just how much water flow you get out of the nozzle. But the truly significant downer of this design is the fact that it's 3 pieces ... the outer barrel, that unscrews, and the inner core barrel, and the exterior part that connects to the hose. The drawback is that after…